Edelbrock Pro-Flo 4150 Style EFI System, Sequential and Multiport, Up to 550 HP, USA Made, 1966-91 AMC V8 (FREE lower 48 ground shipping in Approx. 1-2 weeks)

The Edelbrock Pro-Flo 4 EFI Kit for 1970-1991 AMC 304, 360, 390, 401 CID engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor Jr.-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails, and 4150-flange throttle body. All supporting sensors and the distributor, wire harnesses, and ECU are included. 

The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. This kit uses 35 lb/hr injectors and is rated for 550 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner's initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather.

The E-Tuner provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. No laptop tuning is required.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet

• Replacement for 1966-91 AMC V8 with factory or aftermarket 4-barrel carburetor
• Use the same size air cleaner you would normally use for your 4-barrel carburetor.

• Replace your 4-barrel carburetor with a modern full sequential port fuel injection system
• Instant starting & crisp throttle response, all-season / climate drivability
• Eliminates cold start warm-ups, hard starting, sputtering, vapor lock, & interior fuel smell
• Systems automatically compensate for altitude and weather changes
• Ready to run out of the box with pre-loaded calibrations
• Self-learning technology--no tuning experience or laptop tuning require
• Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg
• Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control.
• E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

• Manufactured To Order:  Please allow approximately 1-2 weeks for manufacturing plus shipping Fuel Injection Style: Multi-port Fuel Injection System Type: Single 4-Barrel Throttle Body (4150 Flange) Maximum Horsepower with Gas: 550 Timing Control Compatible: Yes Power Adder Compatible: Yes ECM Included: Yes Self Tuning: Yes User Tunable: Yes Fuel Pump Included: No EGR: No Transmission Controller Included: No Metering Style: Speed density Intake Manifold Included: Yes Intake Section Included: Complete Intake Material: Aluminum Intake Color: Natural Engine Block Deck Height: Standard deck Multi-Port Fuel Rails Included: Yes Throttle Body Included: Yes Throttle Body Mounting Flange: 4-barrel square bore Venturi Quantity: 4 Venturi Diameter (mm): 44.45mm Airflow Rate (cfm): 1,000 cfm Throttle Body Material: Cast aluminum Throttle Body Color: Natural Injectors Included: Yes Injector Size (lbs/hr): 35 lbs./hr. Calibration Module Included: No Wiring Harness Included: Yes Oxygen Sensor Included: Yes Fuel Pressure Regulator Included: No Distributor Included: Yes MAP Sensor Included: Yes IAT Sensor Included: Yes TPS Sensor Included: Yes IAC Motor Included: Yes Quantity: Sold as a kit. Notes: Supports up to 550 HP. Tuning and set-up app can be downloaded to a Bluetooth capable tablet or smart phone from either the Apple or Google app stores. Use with boosted applications requires a 2-bar MAP sensor.

This EFI system is complete and transforms your ride into an instant starting, crisp throttle response, and dependable joy to drive.  

• This system features the high-performance Victor Jr.-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails, and 4150-flange throttle body. All supporting sensors, gaskets, hardware, and the distributor, pre-labeled OE quality wire harnesses, and ECU are included.  Installation instructions and user guide.  NOTE:  A separate fuel system purchase is required to use this EFI system which is available separately.

• If you are unsatisfied with your purchase, here's what we can do: If your product is defective, damaged in transit, or the wrong merchandise, we are happy to exchange it for the same product within 30 days. If your product is custom manufactured to order, it is not returnable.

• Manufacturer Warranty:  2-year limited